Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish.
INTERIM MAINTENANCE: Sweep large debris and dust mop. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating. Buff or burnish the floor to enhance gloss as needed. Damp mop or automatic scrub using a Betco floor cleaner. ROUTINE MAINTENANCE: Sweep large debris and dust mop.
Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance. A minimum of 4 coats of finish is recommended. Elevated temperatures, heavy coats and humidity may extend dry time. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Apply floor finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Floor surface must be clean, dry and free of residue before finish is applied. RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
